answersLogoWhite

0


Best Answer

Change the ignition. Take a pare of pliers, turn it back, then change the ignition.

User Avatar

Wiki User

โˆ™ 2007-05-06 17:37:26
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: How do you fix a ignition switch stuck in the running position in a 1994 Chevy silverado?
Write your answer...
Submit
Related questions

How do you replace ignition switch on a 2002 Silverado?

Begin by removing the retaining ring at the top of your 2002 Chevrolet Silverado ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.


Why won't switch stay in acc position on a 86 silverado works fine if you hold it in place.?

Ignition switch worn and needs replacement


How do you know if ignition switch is in run position?

if the starter is not spinning and the truck motor is running


Does the 1991 Chevy Silverado have an ACC position on the ignition switch?

Yes. After inserting the key, turn it counterclockwise one click.


How do you replace ignition switch on a 2000 silverado?

Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.


Why won't my 1999 Chevy silverado stay running after i replaced a key tumbler?

The lock/tumbler has to be in time with the ignition switch. I suspect it is not.


What is the function of a stop switch in a motorbike?

The function of a stop switch is to cut the ignition so the engine can stop. If the switch is in the off position and the engine isn't running, then to start the bike you'll have to put it to the on position.


Do you have to turn on the switch to reset the tire pressure light?

Yes, the ignition switch must be in the ignition position -not- the accessory position.


Why does car turn off with key in run position it is ignition problem if you hold key between run and start it will stay running?

Have you tried changing the ignition switch?


Why won't my ignition switch turn back into lock position after changing the ignition switch?

Ur life suck that why


True or false the START ignition switch position activates only the starter motor?

It is false that the stat ignition switch position only activates the starter motor.


99 Jeep Cherokee Laredo stay running after turn off the ignition switch?

99 jeep Cherokee Laredo stay running after turn off the ignition switch?


What would cause a 1998 Honda Passport not to stay running?

If it starts but doesn't stay running after you release the key from the start position, it means your ignition switch is bad. Not a huge expense.


How do you replace the ignition in a 1995 Chevrolet Silverado with tilt steering?

Is it the switch, or the lock that you want to replace?


When you put the key in it won't turn 2003 silverado?

Wrong key - or - defective ignition switch.


How do you restart 2001 z24 after running out of gas?

Cycle the ignition switch on and off several times pausing briefly in the on position. This will prime the fuel system.


How do you change a ignition switch in a 1995 ford thunderbird without having the old keys?

This may sound ridiculous... but force the the ignition switch until the detent "breaks" and you can turn the ignition switch without the key. The risk here is that you could possibly break the assembly that the ignition switch inserts into. If you can get the switch to rotate from the lock position one position clockwise, then you can release the switch from underneath the steering column and pull the switch out. The alternative is to have a locksmith get the ignition switch to rotate one position clockwise and then you can remove the switch and replace it with a new one from any auto parts store.


When the ignition switch is turned to lock?

you need to be more specific. i am going to assume you want to know in what position is the ignition switch in lock. usually it is 2 positions back from "run" but it is in whichever position the key comes out of the ignition.


Why won't half the gauges and radio and windows not work when car is running but work when you partially turn the key on?

Your problem is the ignition switch. Either the switch is bad or if the switch is mounted on the steering column, it may be out of position causing it to only energize the ignition circuit but not energizing the accessory circuits.


How do I reset a 2002 Mercedes Benz S500 Alarm?

Turn your ignition switch to the auxiliary position, without starting the engine. Leave the ignition switch in the auxiliary position for 30 seconds.


How to reset an oil change light on a Jeep Patriot 2012?

1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.1. Turn the ignition switch to the ON position. Do notstart the engine.2. Fully depress the accelerator pedal, slowly, three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.


How do you remove ignition switch on 2000 Crown Victoria?

The ignition switch is usually mounted to the steering column and is operated by a linkage rod.NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:Remove the ignition switch wiring harness.Unbolt it from its position.Bolt the new switch into position.Attach the wiring harness.


How do you replace the ignition switch on a 1991 Ford F-150 pickup?

The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.


How do you change the ignition switch on a 97 Ford F 150?

The ignition switch is usually mounted to the steering column and is operated by a linkage rod. NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch: * Remove the ignition switch wiring harness. * Unbolt it from its position. * Bolt the new switch into position. * Attach the witing harness.


How do you change out a Ford F-150 ignition switch?

The ignition switch is usually mounted to the steering column and is operated by a linkage rod.NOTEOn column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible.On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.The ignition switch is operated by the key switch. Courtesy of Ford Motor Company.To replace the switch:Remove the ignition switch wiring harness.Unbolt it from its position.Bolt the new switch into position.Attach the witing harness.