you cannot fix the timing on your tbird as it is electronically controlled and does not have a distrubutor. have your camshaft or crankshaft sensors checked
The driver side door handle of my cadillac cimerron broke on the inside. How am i able to fix that without going out and buying new parts for it?
how do you fix a gas guage on a 1989 ford aerostar
You can't fix a bad lifter, replace the bad lifter with a new one.
Check to see if the fuse is blown. If it is ok, I suggest you visit a mechanic.
replace motor under the seat
reroute the line around the power steering cooler
If a lifter is worn out you are not going to fix it, you will want to replace it with a new one.
Replace the heater core. It is leaking.
If a lifter is stuck in the lifter bore and won't move, it has probably ruined the cam. The procedure would be to install a new cam and lifters.
take the door panel off and spray some lube on the tracks that worked on mine.
probably a broken cable drive.
Could be the ignition module.
I guess that you are talking about a hydraulic lifter for an auto engine. There is no repair for these. They can be converted to "solid" lifters or used as paper weights.
These engines are notorious for it. There's no harm in the lifter tick itself. It just sounds bad. The fix permanently, replace the lifters. There's a special tool (find it on eBay for cheap) which makes this an easy job.
Could be bad gauge or float stuck in fuel tank
No, they are located under the valve cover.
you fix it
My 1988 ford thunderbird has a digital gas guage. Last week it stopped working. Now all it reads is E (empty) How can I fix it?
The sender is in the fuel tank and requires you to drop the tank as that is the only way to get to the hose and wires.
your ball joints are probably broke...its pretty expensive and hard too fix.
no fix for lifter.... must be replaced... remove valve cover, remove rocker arm assembly replace bad lifters.... put it all back together
See this website: http://www.instrumentclusters.com/odometer_gears.html
By A Chevy
Turn the brightness control up. Could be the reset button for the odometer or another switch.