assuming its an 8 cylinder 1-8-4-3-6-5-7-2 looking at the engine from the front - right bank is 1-3-5-7.left bank is 2-4-6-8 pull #1 plug bring it up to compression stroke now take your cap off rotor should be pointing to #1 on the cap follow the firing order and direction of rotor sounds a little long but if not noted on cap that is your best bet
Spark plugs and wires
Remove the spark plug wires from your 2000 Chevy Impala spark plugs. Remove the spark plugs with a 5/8 deep well socket by turning the socket to the left. Reverse the process to install the new spark plugs.
Give the spark plug boot a twist to free it from the spark plug then pull it off of the spark plug by the boot.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
If you mean, what if your spark plug wires were crossed up, the engine would run terrible if it ran at all.
the only thing crossed spark plug wires can do is cause one to misfire.
18436572
what kind of wires- electrical??, spark plugs??, battery??
you may need a tune up. the wires or your spark plugs
The 1988 Chevy Cavalier spark plug wires are quite easy to remove. The spark plug wires simply pull off on each end. Put the new spark light wires on by pushing downward on each end.
Follow the spark plug wires.... :)
Depending on how many you crossed the engine would fail to run or run very roughly as the spark to the cylinder is not timed correctly