Be the first to answer!
get the whole care re wired also dont turn on your hazard lights!!!
It is either on the floor or the turn signal stalk is the dimmer. Push, pull, or push in to dim the lights.
Pull the hazard light fuse.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
Hazard lights are used on a vehicle in an emergency. The driver is supposed to turn the lights on the warn others that their car is experiencing some sort of problem.
yu can turn them on at any speed
Turn signal flasher?
where is hazard light switch on toyota corolla
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
try replacing all sets of fuses for the hazard and the tail lights.
It probably has 2 Flasher Relays. One for the hazard lights and one for the turn signals. Replace the turn signal flasher.
Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..
Sounds like a blown fuse and/or faulty turn signal relay
It needs checked out but both the hazard and brake lights go through the turn signal switch.
It is most likely the Hazard Switch. The turn signal and the hazard flasher are the same unit and will affect the operation of both. If the turn signals work, then it is more likely to be the hazard switch which is about $30 part.
it called your turn signal is on
you click the left thingy
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
Your car has two flasher relays. One for the turn signal lights and one for the hazard lights. Replace the one for the hazard lights. Any auto parts store can tell you the location and sell you a new one.
The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
There may be a problem with your electrical wiring that is preventing your hazard lights from turning off. You should take your car to a Toyota mechanic.
The switch is below the radio.
If your 1999 Ford Expedition has turn signals that do not work but hazard lights that do work, it is likely that you have a fuse that is blown. You might also have a wiring issue including exposed wiring.