The most obvious answer is to buy new door poppers.
glue
glue it with good glue from Menards
You can easily fix a lose Kwikset door handle by taking the appropriate screwdriver and tightening the screws that attach the door handle to the door frame.
If the handle is loose on a security door, the owner should call the manufacturer, who will supply them with the tools to fix it. For security doors, they will likely send a ring shaped screwdriver, which should effectively tighten the loose screws.
the door panel has a few clips on it that just snap in
Need to know what's wrong with it. Regardless, you'll probably need to get a trim puller and remove the trim from inside the door for whatever repair you'll be making to the door handle.
TAke it to a auto trim shop as there can be a number of things wrong with it.
FRONT DOOR TRIM PANELREMOVALRelease door latch and open door.Roll window down.Remove window crank , if equipped.Remove screws holding door trim panel to door from inside arm rest pull cupDisengage clips holding power window/lock switch panel to door trim panel Disengage wire connectors from switch panel, if equipped.Remove screw holding door trim to outside mirror frame.Using a trim panel removal tool, disengage clips holding door trim to door around perimeter of trim panel.Disengage power mirror wire connector, if equipped.While holding bottom of trim panel away from door, simultaneously lift upward and forward.Separate door trim panel from inner belt weatherstrip.Disengage power outside mirror wire connector from control switch.Separate door trim panel from vehicleINSTALLATIONReverse the preceding operation.
This is extremely hard for the average person. I would suggest taking it to the nearest trim shop. GoodluckJoe
== == == ==
You'll have to take the door trim off and inspect the mechanism. You've probably got a failed cable or linkage.
To remove the rear hatch door panel in order to fix the lock on a Subaru Outback you will need a Phillips-head screwdriver, small flat screwdriver, trim pry tool, and tack puller. Using these items you need to remove the push clips and pry the trim from the hatch.
how can solve my blackberry smart phone 9700 bold error JVM 106