0
How do you get a moen hydrolock off to be able to pull the main faucet thru the mounting hardware?
Wiki User
∙ 11y ago
If the hydrolock adapter is part number 114306, you'll find two white tabs extending thru one side of the adapter. With just your fingers, push these tabs back thru the adapter until they are flush with the opening. Then you will be able to pull the main faucet line and the adapter from the faucet.
I called Moen's very nice customer support number to solve this question.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you remove the center console from a Pontiac Sunfire?
The center console is held on by several mounting screws. To remove it from a Pontiac Sunfire unscrew all of the mounting hardware. The center console will then be able to be pried off.
How can I purchase M6 or M8 mounting bolts?
These are standard metric screw/bolt sizes. You should be able to find them at a local Hardware Store. Such hardware is also available online.
How do you replace lighter on a Pontiac Bonneville?
The lighter module on a Pontiac Bonneville can be removed by unscrewing the mounting hardware. The lighter will then be able to be pulled off the center console.
Where can one get vessel sink faucets?
As with halo sleepsacks, you are able to get vessel sink faucets from most hardware stores. Well-known hardware stores you will most-likely be comfortable buying a vessel sink faucet from include Lowes, FixtureUniverse, and Wayfair.
Will I be able to attached LaToscana Elba Single Control Lavatory Faucet work on a very old sink?
no, iyou will not be able to attached LaToscana Elba Single Control Lavatory Faucet work on a very old sink
How do you fix a concealed sliding door that has dropped?
Usually I have found that the problem is not that it is broken, it is that the trolley has come loose from it's connection to the door. Most of the newer doors you will have to remove an upper piece of molding to access the door hardware. Use some wood shims to support the weight of the door and you may be lucky enough to be able to adjust the existing hardware to make it work again. If the hardware is broken then you will have to remove the door, study the track and see if you can reach enough of the screws to loosen the track; by lowering the door and track away from its mounting you maybe able to repair the problem hardware... otherwise the door will have to be removed for replacement hardware.
How can I repair my shower faucet?
Depending on the issue it should be able to be done at home very simply. If it's a leak then I would take apart the faucet and check for worn or corroded parts that can be easily fixed. You can find all parts needed for an at home repair at your local hardware shop. If I knew more about the repair in question I could give more information. If you can isolate the problem then the solution will be easy enough.
How do you replace a blower motor on a 1997 Bonneville?
The blower motor on a 1997 Pontiac Bonneville is located next the evaporator core. It will be mounted behind the glovebox on the passenger side of the vehicle. Remove the glovebox, mounting hardware, and sensor clips. The blower motor will be able to be replaced.
On the 2002 Thunderbird what can you use to remove the hard top if you don't have the mounting key?
On the 2002 Thunderbird, a person can remove the hard top with a new mounting key. An automotive parts store or a dealer will be able to order the mounting key for that vehicle, if they do not have one in stock.
Wate are the ways to larne computer hardware?
I hate to be sarcastic, but . . . you will not be able to "learn" computer hardware, until you are able to spell. Most information systems require some reading of directions. Sorry.
What are the desadvantages of computer hardware?
There are no disadvantages of computer hardware, because without it, the computer would not be able to function, or even exist for that matter!
How to Install a Kitchen Faucet?
If your kitchen faucet is old, leaking, or simply out of place amongst your new kitchen decor, it may be time to replace it. Here are the basics of how to install a new faucet as well as a few tips on making the task as easy as possible.Turn Off the WaterTo avoid a wet, sloppy disaster, make sure to turn off the water supply to your sink before tackling this task. If your sink doesn't have a specific shutoff valve, you may have to climb up to the roof and use the valve connected to your water tank. Once the water is off, turn on your sink faucet to drain any excess water from the pipes.Detach the Old FaucetA basin wrench is essentially for removing an old kitchen faucet and installing a new one. The coupling nuts that connect the faucet to its supply tubes are behind the faucet. Use your basin wrench to unscrew these. Once the supply tubes are disconnected, unscrew the mounting nuts that keep the faucet in place and lift the assembly slightly to reveal the nut attaching the sprayer hose to the faucet. Use your basin wrench to unscrew this nut as well.Position the New FaucetInstead of setting the new faucet in place then crawling under the sink to hook it up, connect as many connections to the faucet as possible before setting it in place, and then feed the lines down underneath the sink through the holes. This is usually possible at least with the sprayer hose and sometimes with the hot and cold valves.Seat the faucet in place, making sure that the gasket is lined up right, and then crawl under the sink and screw on the mounting nuts to keep the faucet in place. Tighten these first with your fingers, then with your basin wrench.Connection Odds and EndsUse your basin wrench to attach any connections you weren't able to get to above the sink, such as the shutoff valves, and double check to make sure all connections are as tight as possible. Turn the water back on either from your roof or from under your sink, and check on your new faucet to make sure that everything is running smoothly and there are no leaks. Turn on both hot and cold valves and try out any additional features that may have come with the new faucet. Make sure you are completely satisfied before putting away your tools.
