How do you get and reset radio codes for 1994 Hyundai elantra?
To reset the EMS on a Hyundai Elantra, disconnect the battery. Leave it disconnected for 10 minutes and then reconnect the cables.
The check engine light, on your Hyundai Elantra can be reset by removing the fuse. Keep the fuse out for 10 seconds and replace it to its slot.
airbag light is on dash
Mine was reset when the radio says "code" by entering 2456 on radio channels
It is a complicated process to reset the radio in your Hyundai Sonata after changing the car battery. First you must have the access key. Enter the access key at the prompt and follow the instructions that will be shown on your radio screen.
Manually. Next time, buy a device specifically made to keep radio presets (they plug in to the lighter socket) or else at least write down your stations so you don't have to try to remember them all after you replace the battery.When a station is tuned in, press the button you want to program the station to, and hold the button until the radio indicates the channel is set.
look in the manual or log book radio details should be on a sticker.ie reset codes etc.
Disconnect battery (plus) for 5 minutes.
The exact method to reset a radio with a code will vary depending on the make and model of the car. Reset codes are typically needed when there is a power loss to the car or the radio requires maintenance.
Radio codes are set at the factory and cannot be reset. If you lost the code go to your dealer and have them look it up.
Tune the radio to a desired station and depress the "radio" button. Station will go quiet for a second and the return as saved.
undo the positive or negative battery cable on your cars battery, few minuetes should do the trick.
Go to dealer for code.
how do i reset the computer on my hyundai xg300
i have the codes but am unable to enter them the radio displays SAFE also try disconnecting the battery
Contact your dealer to get radio code. All radio codes ar vin specfic. The dealers will ask you for your vin.
i need master code for alfaromeo156 selspeed
If you do not have the Radio Manual with the proper code number, then you need to contact a dealer with the VIN. Provided the radio has not been changed they should be able to give you the codes.
there is no code for a reset for the autoradio ford2004, but when you know the right code you have to turn on the radio for an half our then you have possibility to give the right code greetings atalay
Once you get the radio serial # (on the back of the radio or in the glove compartment) and the vehicle VIN number, you can call Hyundai Customer Service (USA - 1-800-633-5151) or (Canada - 1-800-461-8242) and they can give you the 4 digit code needed to reset the radio. This is the process I took with my 1995 Hyundai Sonata.
You can't reset a radio code on a VW. All radios have their own code, recorded in the car owners manual or radio manual. If you dont have the code, your'e pretty much screwed.
There is no exact way to reset a Kia Sorrento radio using a code. Codes can be revealed at the car dealership providing you prove ownership of the car. The radio code is tied to the VIN number.
Leave the radio turned on. After several times (usually 30 minutes), it should reset itself. Please note that 10 invalid attempts to enter the code will lock the radio completely.
Radio codes of Acura Tl vehicles are part of a standard anti-theft system. To the reset the system just unplug the battery from the car for at least five seconds.
if you go to the dealer with the serial # of the car they can find the code for you