How do you get rid of visible green algae if the chlorine level in your pool is a little high but the water is balanced and the stabilizer good?

Answer 1

They are on the right. --> Use pool shock. Double shock it to get rid of algae. Start using "No-Phos" or "Phos-Free". This eliminates the food for algae. Use an algacide to kill the existing algae. Brush all the surfaces of the pool every day to keep algae from latching onto the walls. Vacumn and backwash twice a week to get rid of the dead algae. Make sure your pH is correct so the chemicals can work properly. Once your water is clean, keep using the No Phos product every week. This has saved us hundreds of dollars in chemical use. I'm not sure what you mean by "the water is balanced", but if it means that your PH and Alkalinity levels are ok, then I would suggest making sure that the chlorine levels you're checking are for Free Chlorine, not Total Chlorine (there is a difference). If the Free Chlorine is fine, then as the first guy said, I would shock the pool. If your Free Chlorine dips below the normal levels, however, you should use chlorinating shock. That way the chlorine jumps up, and any chlorine tablets you add into the pool will keep the chlorine level high.

Once the algae is dead, brush the entire pool (including the walls, floor, and any stairs, ladders, lights, or other objects that are in the pool). Brushing the pool stops the algae from sticking to anything in the pool, and allows it to be picked up by your filter. After you brush the pool, run the pump, and clean the filter when necessary. You'll know the algae is dead when the pool stops being green - the green color is chlorophyll, which is the chemical that the algae uses to get energy using photosynthesis.