To get the alternator to fit out of the engine bay, you must remove the mounting brackets for the alternator as well. Once you remove the brackets, the alternator will fit out of the bottom of the engine bay. It will only fit out of the bottom, it will not come out through the top.
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
The factory tape deck on a 1996 Acura Integra can be taken off by removing the center console. Once the console is off remove the remaining mounting screws on the radio and pull it out.
on my 95 i took the driver side tire and brake assembly off to get to it on my 95 i took the driver side tire and brake assembly off to get to it
just turn it off
To change the mud guards of a Acura Integra the mount screws must all be removed. The car can remain on the ground and the screws will all be easily reached. Once all of the hardware is off pull the mud guards off the vehicle.
brake lights won't go off 1995 acura intergra
When changing the corner lights on a 1992 Acura Integra first find the housings for the corner lights. Pull the old lights off and replace the bulbs.
The radiator support on a 1991 Acura Integra is held on with several bolts. Use the appropriate sized socket and loosen all the bolts. Pull off the support.
The front bumper on a 1991 Acura Integra is held on by several mounting screws. Remove all the screws and gently pull the bumper off the remaining mounting clips.
The headlight assembly on a 1998 Acura Integra is held on by brackets. To remove them loosen the bolts on the brackets. Pull the housings off. Install the new housings by placing them on the brackets.
You can install any Honda b series hydraulic transmission to your car, like the integra gsr transmission, or the integra type r transmission
yupp they fall off all the time