You can remove the governor on an acura integra by having the ecu chipped.
The radiator support on all hondas/acuras are all tack welded in. you will see like a small indentation of a circle at every tack weld.
im going to say almost a positive no, being as they are entirely different generations, different head light support etc. 94 is oldest gen 3.
check out www.honda-tech.com
Follow the lower radiator hose from the radiator to the engine, that's where it is.
Remove the bolts that hold the distributor cap onto the distributor. Once this is off the rotor can be reached and replaced on a 1994 Acura Integra.
91 acura integra has a b18 91 acura integra has a b18
The water pump on a 94 Acura Integra is located on the front of the engine. It uses the power of the engine to circulate hot water from the engine to the radiator to cool it.
if u do it urself n buy the radiator for liek 120-150 bucks
The drain plug is on the drivers side of the radiator. It is almost straight down from the headlight assembly.
On the other end of the large top-left radiator hose.
The thermostat is located at the other end of upper radiator hose.
Should be a in a removable housing at the engine end of the upper radiator hose
just turn it off
call a mechanic they know how.
The front bumper on a 1991 Acura Integra is held on by several mounting screws. Remove all the screws and gently pull the bumper off the remaining mounting clips.
If yoor 1996 Integra has the1.8L engine, the thermostat is located at the back of the motor at the end of the bottom radiator hose.
Yes it will fit