First look under the visors, pull the latch handles away from the window. The lid will open slightly. Then push forward the drivers seat and look under the lid, you will find a spot to pull a cable which will release the top from the rear clips. After that pull up on the rear of the top and hold upward while you push one of the yellow buttons to lift the lid. One of these buttons is also located under the lid and there is also one inside the door jam. Once it raises you simply lower the back section and pull the front section up and back, it will seat itself in place. Then close the lid. It is quick and simple
Coupe or convertible? Yet another un-specific question.
Didn't make a convertible in 1984. It has Targa roof panel that can be removed with a tool.
Yes, but you have to do it manualy because it doesn't have a power top.
There are hard top corvettes and convertible corvettes.
as hard a dick on viagra
no because its a convertible and if you do it will mess up the convertible top the luggage rack bolts to the top portion of the rear section
I dont believe there is any adjustment a late model corvette. I do know with any convertible they will shrink if left down for a while and expand in high heat while up. put your top up in the evenings if your having problems latching it in the morning. if it puffs up in 95 + degrees it will relax when it cools.
How do you put the top down on a 1998 Chevrolet Convertible
== ==
To let the top down on a 2001 Corvette you will need to go where the windshield meets and then, and then you would want to pull down all of the latches. This should let your 2001 Corvette top down.
Anything can be done to any car, at any time. However, you are looking at some serious fiberglass work.
== ==