assuming itis the switch and not the motor remove switch n hot wiretillup or use switch out of other side.....
It is not possible to replace single switch in the driver side window cluster of Ê2000 Chevy Tracker. The cluster is only sold as one piece and single switches cannot be purchased.
you should be able to take the cover off the driver's door by unscrewing it,then unplug the window switch and replace it,fairly easy..
it could be your window switch..try changing it
If it is just the driver side window and button, more than not the master control switch needs to be replaced. It could also be the window moter or reg. Either way its around $100 if its just the switch that's bad.
It could be the switch,power source to the switch, or the motor is burnt up. More than likely the motor is the problem since the driver side get a great deal more use than any other.
I would try the window switch first , but if you are going to replace the switch then you will see how to replace the motor. You would have to take the door panel apart after that its easy.
Yes without a doubt.
yes.
check for broken wires in the door and check for pawer across the switch drive safe
it's under the oil pan.
Dexron 3.
Yes