there should be a alen screw through the top and bottom of the caliper that bolts the caliper to the spinle mount bracket remove those two alen screws and the caliper will lift off of the disk and then the brake pads can be removed from the caliper.
GTO wasn't made in 1991.
Yes. Disc and Drum brakes mount differently, each uses a different spindle. Brake lines, hoses and master cylinders are also different.
ecu is in the centre console behind the stereo
27, 297 ( in thousands), accordin gto 1991 census./
The front grille inserts and the tail light assemblies were different, the engine went from a 389ci to a 400 ci., tri-power carburetion was not available for the 1967 model year and front disc brakes was an option for 1967.
No.
no it wont fit. The body lines are different. A 66 will fit a 67
Chiltons manual at the library.
It is on the right side in front of the air box...
its in front of the radiator, usually theres 2
The GTO in Bandits was a 1967 GTO. From the front 1965-1967 GTOs look very similar. The tell in the film is the tail lights. Only the 1967 GTO broke the tail lights out into fours on either side of the rear of the car.
FOR MOST AMBIENT TEMPERATURE RANGES 10w/40 FULLY SYNTHETIC ENGINE OIL IS SUITABLE FOR THE MITSUBISHI GTO 3 LITRE V6 TWIN TURBO