take off the wheel, take off the caliper, pull
295 ft-lbs
front brake assembly diagram for a 2006 F150 4X4
The min thickness should be stamped on the backside of the rotor, pull and examine.
How to remove the right side axle half on a 1995 f150
1992 ford f150 firing order --------------------------------------------- 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 The distributor rotor turns COUNTERCLOCKWISE The distributor cap is installed with the # 1 position facing to the rear and slightly towards the drivers side of the engine
where is the pcv valve on a 1992 f150 with 5.0 liter
1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 ( The distributor rotor turns COUNTER CLOCKWISE )
(short wheel base ) 16.5 (long wheel base) 19
to remove the front rotors u must first remove the caliper and caliper frame then remove the nut in the center of rotor rotor should fall off then hope this helps fordtech
It is clockwise, firing order is 1-5-3-6-2-4
I had to drill a hole on the side of the old rotors. make sure the hole is out towards the front edge of the rotor. You want to have a hole that shows the line where the rotor and axle meet. Then I took a hammer and a pointed punch and they came off.
NO