open the hood and squeeze the lowbeam connector and push down and it should disconnect then turn the bulcounterclockwise to remove bulb. reinstall in reverse order your done.
High beam-9005 Low beam-9006
Low Beam Headlight Bulb Size: 9006High Beam Headlamp Light Bulb Size: 9005
on two door 08 accord H11 low beam and 9005 high beam 4 doors 9006 low and 9005 high
you press that one button 5 times and it will do it automatically!!!! foo
Inside the switch.
yes
Low beam of lamp burnt out, poor ground connection, corroded headlight lamp contacts.
The 2006 Honda Pilot has 4 headlight bulbs - 2 low beam and 2 high beam. See sources and related links below.
Burnt out or loosely connected bulb.
H6054 sealed beam head light
Remove the left front wheel/tire. Remove enough of the plastic clips holding the front part of the wheel well liner so that you can pull it back far enough to access the rear of the headlight assembly. Once you do that you will be able to remove the bulb. Or you can just remove the entire liner, your choice. This is the only way to easily access the low beam headlight.
Probably the low beam filament in the dual beam headlight lamp is burnt out. See sources and related links below for more information on the headlight lamp.