Black plastic pipe is ABS -Use yellow ABS cement. -I don't understand "grey bard fitting" -Take this to your plumbing store and they will advise.Black plastic pipe is ABS -Use yellow ABS cement. -I don't understand "grey bard fitting" -Take this to your plumbing store and they will advise.
its glue spicily for pvc pipe only
Yes, but not with PVC glue.
The amount of glue that you use on pipe depends on the number of joints or fittings - not length of pipe. - One litre is a lot of pipe glue ! -I have done thousands of feet of PVC pipe and fittings this past year, and still have some glue left in my litre can of Weld-On 711.
No, ABS glue will not damage PVC pipe. -It will not stick it properly either.
ABS yellow glue is the correct glue for ABS pipe. The only other glue to consider is Weld On Transition cement if you are gluing ABS to PVC parts.
Black plastic pipe is ABS. What is'gray bard'. Try ABS yellow cement ( from pluming supply store). -Show them 'gray bard', they will advise you.
CPVC glue is specifcially formulated to glue CPVC pipe and needs a primer.
It might work for drains. It will not seal plastic pipe against water pressure. - Always use the correct pipe glue.
if your waste pipe is PVC and your glue is for PVC . yes! but make sure to use a primer(cleaner) on the pipe first.
I don't understand why you'd want to do that . CPVC glue is expensive, PVC glue is cheap and glues PVC pipe better.
A PVC glue such as Weld On 711, and primer.
Scrub the glue with 'Whitlam's Glue Wash Hand Cleaner' -available at plumbing supply stores.
NO. - PVC and galvanised pipe can ONLY be joined by mechanical connectors.
There are hundreds of different types of glue. Super glue, crazy glue, white glue, yellow glue, fast epoxy, silicone, slow epoxy, ABS pipe glue , just to mention a few.
This is quite confusing. -If you mean "plumbers glue that has been glued to the metal pipe" as opposed to "a shower that has been glued to a metal pipe" , then it's a little easier. -Any plumbers glue, be it ABS, PVC or CPVC glue, or Transition cement can be peeled off metal pipe.In future PLEASE say what exactly you mean by "metal pipe" - copper, - galvanised, or which other metal, and please -Name your glue - Most plumbers commonly use at least 4 different glues.
You'll have to explain what PC pipe is. I work with all kinds of pipe and never heard of that one.
Yes, temporarily. In the long run it's more efficient to get the pipe glue relevant to that pipe,
No, it will not glue it, just dry up and become flaky. You must use a proper glue for each plastic. - Yellow glue is only for ABS.
It depeds whatANS 2 -ABS pipe glue dries in about 25 min to half an hour, cures almost totally in 4 hours/
No, they cannot be connected. There is no glue on the market at the present time that can glue PVC & ABS together. It's difficult, as after one tries to glue it it gives the impression of being solid, but under pressure it will fail. Also, keep in mind that some plumbing codes do not allow ABS pipe to be used.
Only if the can say you can
Colder than 10c - 50f , the glue becomes almost unusable.
You can get cotton balls, pipe cleaners and wiggly eyes. First you get black cotton balls and black pipe cleaners. The cotton balls are the body you attach the eyes with hot glue. Then you attach the pipe cleaners with the hot glue on the body.