answersLogoWhite
Home Improvement
Building and Carpentry
Late Model 1979-New Ford Mustangs
Glue and Adhesives

How do you glue the regulator support back to the window on a 2001 Mustang and adjust the window?

252627

Top Answer
User Avatar
Wiki User
2004-12-14 06:05:37
2004-12-14 06:05:37

The question you ask is too involved for a proper answer. You may want to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.

1

Related Questions

User Avatar

To replace a rear window regulator on 2005 CTS Cadillac remove the side protection panel of the car door then adjust the regulator.

User Avatar

The cables are not adjustable. The regulator is only serviced as an assembly.

User Avatar

opal astra how to fixit engine electrics

User Avatar

Only if you change out the entire regulator. The power regulator unit is pitched a little different due to the power motor components.

User Avatar

unbolt the window from the regulator and push the window all the way up and tape window to door then run the motor all the way up til it stops then reattach widow to regulator.

User Avatar

It is best to replace entire regulator as one unit. Remove door panel. Remove bottom nut of regulator, and remove two top nuts of regulator. Loosen two bolts on bracket holding window. Support window, and carefully remove regulator as one unit.

User Avatar

I JUST CHANGED MINE IN MY 88 PRELUDE. IT TELLS U IN THE REPAIR MANUALS, LIKE CHILTONS. FIRST, U HAVE TO TAKE OFF THE TRIM PANEL. ADJUST THE WINDOW WHERE U CAN SEE THE CLAMPS AND SCREWS THAT HOLD THE WINDOW TO THE REGULATER THREW THE HOLES. THERE ARE 2. UNSCREW THEM AND GENTLEY TAKE THE WINDOW OUT OF THE DOOR. THEN UNSCREW THE BOLTS THAT HOLD THE REGULATOR IN PLACE, SHOULD BE 4 BY THE WINDOW CRANK, AND 2 TOWARD THE LEFT SIDE. AFTER THE REGULATOR IS COMPLETLEY LOOSE, ADJUST TO LET THE REGULATOR COME COMPLETELY OUT OF THE MAIN HOLE IN THE DOOR. TO INSTALL, DO EXACLY OPPOSITE. TAKING THE WINDOW REGULATOR OUT, AND INSTALLING IT BACK IN IS PRETTY EASY. INSTALLING THE WINDOW BACK IN, WILL TAKE A LITTLE TIME, TO ALIGN AND TIGHTEN THE BOLTS TO THE WINDOW CLAMP ONTOP OF THE REGULATOR, ASK A BUDDY TO HELP U OUT ON THAT ONE. INSTALL TIME TOOK ME ABOUT AN HOUR AND FIFTEEN MINUTES.

User Avatar

what is a window regulator on a 01 vw jetta

User Avatar

To repair a window that is coming off track on a \'95 Mustang you will need to remove the door trim panel and access the inside of the door. Once you do this, you can then replace the regulator, which causes windows to come off track.

User Avatar

window regulator cable is broken need new regulator

User Avatar

HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW

User Avatar

need to know how cables connect on window regulator

User Avatar

if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.

User Avatar

i need to know how to do the adjustment on front windows of 1967 fast back mustang There are four points of adjustement for the door glass. Two are for the vent window, these two are used to adjust the vent window in or out and forward and back. There are two more for the door glass, these two adjust level and in or out. ::AverageJoeResto.com::

User Avatar

Which regulator and what year? You have a window regulator, voltage regulator, fuel pressure regulator to name a few.

User Avatar

Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.

User Avatar

To remove the drivers side window and regulator, you will need to remove the door panel from the door. Then you can unbolt the regulator and window to remove them.

User Avatar

Where can you find a window sticker for a 1984 ford mustang?

User Avatar

Window regulator controls the up and down motions of your car window. Both electric and manual windows have a window regulator. Not the easiest part to replace, but once you dissembled the door panel it should be fairly simple to replace.

User Avatar

You have to disconnect the glass from the regulator or clip the regulator cables.See this post for instructionshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator

User Avatar

You have to disconnect the glass from the regulator or clip the regulator cables.Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.