If there is only one wire connection on the electric choke then that wire needs to be a positive wire. You will want to run one that only has voltage when you turn on the key. If it has two connections, one is positive and one is ground. Same thing as the positive connection on the single wire type....then simply run the other terminal to a good ground.
It goes directly to the back of the top of the alternator.Easy
There are two wires needed for an electric choke. One will be a black ground. The other you will have to run from a +12 volt source off the fuse panel. You would want a power source that is only on when the ignition switch is on.
how do you hook up a manuel choke on a small block chevy
You can hook up electric pianos through USB ports, these days and get great sound.
There is an arm that must go to the choke and I'm not sure where. I think the plastice piece might be broken.
It connects to the back of the alternator towards the top.
The choke enriches the mixture for start-up and then is heated by a small electrical heating coil so the choke goes off when the engine is at operating temperature.
there is no choke its got an electric choke on the carb
no
The electric choke wire connects to the electric choke assembly on the carburetor. It's a round, black plastic assembly that is on the side of a STOCK carburetor. There SHOULD be a connection on the "HOT" side of the coil that lets you connect the choke wire.
Electric
When hook ups are available at campsites there are two options, full and water. Normally the full hook up includes electricity and water, whereas the water hook up does not include electricity.