Best Answer

Connect the green wire to the negative side of the coil.

User Avatar

Wiki User

โˆ™ 2007-05-20 11:23:27
This answer is:
User Avatar
Study guides
See all Study Guides
Create a Study Guide

Add your answer:

Earn +20 pts
Q: How do you hook up tachometer to a Chevy 350 that does not have HEI distributor?
Write your answer...
Related questions

How do you hook up the tachometer to the distributor on a Chevy 350?

on the drivers side of the distibutor cap using a blade electrical hook up you can plug into the opening or if there is a wire already there splice into it make sure all your grounds are in place or you will burn up you coil

How do you hook up a tachometer to a Chevy 350 with HEI disturbutor?

On the distributor cap there is an extension that juts out toward the driver side. underneath this are two wire terminals. they should be marked on the top of the cap "Tach" and "Batt." A wire with a male spade end crimped onto it fits into the "tach" terminal and provides a signal for your tachometer to use.

How do you hook up a tach to a 1984 Chevy 350 engine?

if it is a hei ignition there is a place on the distributor cap that says tach.

Will a distributor from a 90 Chevy 350 work in a 99 Chevy 350 vortec?


What Chevy 350 parts are interchangeable with Chevy 454?

The distributor and the oil filter.

Should the distributor face forward or backward on a Chevy 350?

The distributor should face forward rather than backward on the Chevy 350. It is important to mark the front face of the distributor before removing it.

Will a 305 Chevy distributor fit a 350 block?


What fires the distributor?

where does the hot wire come from going to the distributor on a chevy 350

How do you change your distributor from a 305 to a 350?

305 is the same distributor as a 350 will even fit some big block chevy's.

Can a Chevy 305 distributor fit in Chevy 350?

Yes. Its a direct bolt in.

Which way does the distributor turn on a Chevy 350?

When looking down on it: clockwise

Will a distributor from a 350 Chevy small block fit a 1971 442 350 rocket?


How can you tell a Chevy 350 engine from a Pontiac 350 engine?

On a small block Chevy the distributor goes through a hole in the intake manifold. On a Pontiac the distributor goes behind the intake manifold.

Will a distributor out of a 1997 Chevy 350 engine work in a 1972 Chevy 454 engine?


Can a distributor from a 1992 Chevy c-1500 350 engine work on a 1969 396 Chevy?

No the distributor gear that is on the end of the distributor is to small for the big block cam shaft.

What are the points gaps for a Chevy 350 motor?

inside the distributor.

Will a Oldsmobile 350 Distributor fit a Chevy 305 engine?


Can a Chevy 350 distributor fit in Chevy 305?

Yes it will fit. This distributor will fit all small block and big block Chevrolet engines.

Do you have to remove the distributor to replace the stator in a 90 Chevy 350?

Yes you do. You have to take the distributor shaft out of the distributor to Remove the pick-up coil / stator.

Can the distributor from a Chevy 350 fit a Chevy 3.8L V6?

no that is not possibale because of the lenght of the shaft

Is the distributor on 1984 350 Chevy the same as 1989 350 Chevy?

84 has a vacuum advance 89 has an electronic advance Thats the only diff.

How do the timing gears and distributor align on a Chevy 305?

same as a 350

How do you sEt the timing for early model CHEVY 350?

turn the distributor

Where is the coil on a Chevy 1992 van 350?

INSIDE the top of the distributor.

Where is the distributor located on a 1976 Chevy 350?

try the back of the intake!!