Most auto parts stores have wiring kits that you can just plug into your factory wiring without any trouble. Check with your local auto parts dealers
The brake controller has to be hooked up to a power source. The controller also has to be hooked to the brake switch or tail lights, then to the plug for the trailer.
test
I would check the running lights for one with a short. I had the same sort of thing with my trailer and I spent way to much time troubleshooting the brake and signal wires. Turns out a running light bulb connector was grounding out on the trailer and messing it all up.
it is under the hood on the driver side in the fuse box
The bulbs on trailer look good.Lights on truck work.Might be ground not sure.Looks ok.
Many auto parts retailers will have a plug-in trailer connection that is designed specifically for your vehicle. If they do, it's usually just a quick process of following the directions. It's worth it especially since it can help you keep from having the connections corrode.
Left sinal not working in trailer hook up ?
WHAT ARE THE WIRE COLORS FOR BRAKE AND TURN SIGNALS ON 1999 PONTIAC IN ORDER TO HOOK UP TRAIER HITCH PLUG?Not positive yeLL0w wire Left turn signal, riGht Green wire once you have the turn signal wiring hooked up the brake lights will automatically work because the brake lights work through the turn signal wiring, brown running lights, white ground.
The center pin of a seven blade trailer plug is for reverse lights, not power. What type of truck is it? What trailer plug do you have...
no, but with a truck you can hook up a oil rig.
Then the brake lights are out but the middle one still lights up. (:
You'll need to purchase a brake module. There are several types, and all come with complete installation instructions.