Want this question answered?
Never heard of a v6 in a Wrangler, only inline 4 and inline 6.
6 quarts
yes but you need to cut the wires to the stock one in the tank or cap them
Remove the wiring harness from the back of your 1993 Chevrolet Camaro blower motor. Remove the blower motor retaining nuts. Remove the fan from the front of the blower motor. Reverse the process to install the new blower motor.
It will cause the oil to sludge up over time.
Type your answer here... 2 hrs
The A/C systems blower motor on a 1993 Acura Integra is located behind the glove box on the passenger side of the vehicle. Replacement requires removal of the glovebox, lower passenger dash, and covers. The blower motor is located next to the evaporator, and held by several mounting screws. Just unmount and unplug the blower motor to install the replacement unit.
install distributor rodeo 1993
there are actually 3 fuses ( that i have found) 2 are in the fuse panel below and to the left of the steering column marked ac and auxilary ac/heat. my 1993 g3500 vandura also has an inline 20 amp fuse wired in between the fuse panel and the rear blower motor switch.
First, take a socket wrench to remove the cover of the blower motor of a 1993 Chevy truck. Then pull the motor blower out and install a new one in its place. Lastly, screw the bolts of the blower motor cover back in.
Remove the wiring harness from the back of the blower motor in your 1993 GMC 1500. Remove the blower motor retaining bolts. If the new blower motor does not have the fan attached to and you will need to remove the fan from the old blower motor. Reverse the process to install the new blower motor.
If the motor has not been turned over without the belt you should be able to put the new belt on where it is..