Want this question answered?
You remove the ac compressor and install a pulley bypass kit from a part store.You remove the ac compressor and install a pulley bypass kit from a part store.
You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.You will need to buy and install an ac bypass pulley from Napa or other parts store to bypass the ac compressor.
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
passengers side behind harmonic balance pulley bottom of engine.Put on lift take off tire makes job easier
found this bypass pulley: http://www.1aauto.com/1A/ACBypassPulley/Dodge/GrandCaravan/1AEPM00050/1089407
An ac bypass pulley for a 1989 Chevrolet can be purchased at any auto parts store. The cost for the pulley starts at $26.04.
hey had this same prob u cant bypass it but you can buy a bypass pulley but gotta remove the compressor i tried to bypass with a belt but its not enough tension so get the pulley and your good to go
Yes , but you must remove the compressor and install the bypass pulley. The belt designed for non ac trucks will not work on trucks with a.c. The belt tensioner pulley goes the wrong way
The bypass pulley uses the existing compressor as a base (it bolts directly to it so you can use the original serpentine belt.) Autozone has it for $35.00, but I'm sure you could find it for cheaper. I just installed one a month ago on my 98 T&C. Good luck!
No, not that I know of. ZXTuner sells an AC Delete pulley that replaces the compresser with an idler pulley. I have it on two of my ZX2s and it works fine and is easy to install and no new belts are required.
pulley puller
yes you can, just go buy an ac bypass pulley, pull your compressor, and put pulley in its place