What year? Basically the bar is secured to the frame with bushings at 2 points at each end of the straight portion... and the ends are secured to the lower control arm with linkages bolts usually aprox. 6 inches to allow the control arm to go down and up with out restriction of movement. Rubber or poly material bushings are used between between the retainers and a sleve around the bolt is used in between the ends of the sway bar and the control arm. the sleeve absorbs the compression side and the bolt maintains the other when the vehicle sways.
I have a 2000 Buick Regal GS how do I change my front sway bar
how do you replace the front sway bar likn in a 1999 Grand Marquis?
sway bar end linksway bar end link
A little more information. Year/model. Some sway bar links become loose because of wear and the links continue to work but make a noise when the front end hits a bump. Other sway bar links will break altogether and the vehicle will lean excessivly when going around a corner.
Need to know what your question is.
It has a sway bar in the front and in the rear. It has a connecting link at each end of each sway bar = 4 total
How do you install a rear sway bar on a 2003 f 150 4 wheel drive
change the sway bar rubber bushings and sway bar link bushings
Check with a Ford dealer - there was a recall on the front sway bar links because under certain conditions they could fracture - so they were replacing the left and right front sway bar links under the recall. (Helpfull)
Very Simple, Raise the cars front end, remove the wheels, remove the sway bar links on each side. Remove the two bolts on the bracket holding the sway bar on each side and then wiggle it out. I just replaced my rack and pinion and had to remove the sway bar to have more room to work and it was not hard at all.
sway bar is broken
Get your new sway bar and you will see what has to be taken loose to remove and reinstall it.