Want this question answered?
Go to the dealership and purchase a license plate holder. There should be instructions as to the installation. You will need to drill 3 holes,denoted by dimples, in the bumper. Install the holder and then your tag.
take off the license plate then screw the holder on with the plate.
6mm
You can order personalized license plate holders through autoplate.com or through amazon.com. They average $15-22.
How do you change the liscence plate light fuse
You need to unscrew the whole cover panel for license plate.
Remove 1. Bolts retaining license plate lamp to bumper. 2. Socket from license plate lamp. 3. License plate lamp. 4. Bulb from socket. Install or Connect 1. New bulb to socket. 2. Socket to license plate lamp. 3. License plate lamp. 4. Bolts to retain license plate lamp to bumper.
Yes, use a bracket.
Open trunk, plate fits through a slot--just push up from the outside front of plate
== # Remove screws attaching license plate lamp to rear bumper # Remove lamp from bumper. # Remove bulb socket from lamp. # Pull bulb from socket. == # Install bulb into socket. # Install bulb socket into lamp. # Place lamp in position. # Install screws attaching license plate lamp to rear bumper.
Open up your trunk and look up above the license plate. It is held in by screws. undo the screws adn unit drops down.
Go to a Honda dealer and get a license plate bracket for that model/year. That's what I did for my 2006 Civic. It's held on by two screws on the bottom that go through two clips on the plastic grill just beneath the bumper. The top two screws just hold the license plate to the bracket. No need to drill holes in the bumper. Hope this helps.