0
How do you install a new AC compressor belt on a '99 Chevy Metro?
Wiki User
∙ 12y ago
How to change a Chevy metro ac belt.
It's been a while, I still have the car (130K) but it's pretty easy, if I remember right.
1. It's easier if jack up the passenger side of the car. But it is not a "have to".
2. You don't absolutly have to remove the plastic engine compartment cover, but it's easier if you do-it makes it easier to see what your doing. They just snaps/pry out, if you break one of the fastners you can cable tie it back or go to auto parts store and get another plastic fastner. If you've done it before you can 'kinda reach around the cover.
3. There is a bolt to slip a socket on and by turning it one way or another you either tighten or loosen the belt. Keep turning till you get enough slack to slip the belt off. make sure to look at exactly where the belt goes.
4. Take it off, slide the new one back on and tighten till it seems reaspnably OK.
5. The bad/dangerous thing is; that to tighten the belt properly you should have the engine running and turn the adjusting belt until the squealing noise goes away. A car withan engine running and belts whirling around looks dangerous because it is!!!Be careful !!! You are on your own- with not second chances!!! You might have to drive it a bit and do it again.
If you have any questions, miketayse@Yahoo.com
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Eliminate AC compressor 1994 Chevy pickup?
Remove it, and install a shorter belt.
Where is the AC tension pulley for a 2000 Chevy Metro?
you dont adjust a tension pulley you adjust the position of the compressor to tighten the belt
How do you replace the AC compressor on a 1997 Chevy Malibu?
Remove the air conditioning hoses from your 1997 Chevy Malibu air conditioning compressor. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.
Can you change an alternator belt from under a 1998 Chevy Metro?
can you change the alternator belt in a 1998 Chevy metro from under the car.
How do you replace the AC compressor on a Chevy Tracker 2001?
You will need to remove all of the Freon from your air conditioning system. Remove the air conditioning hoses. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install the new air conditioner compressor.
Does a 2001 Chevy Metro have a timing chain or belt?
Chevy Metro 2001 (1.3 L) has a timing belt - hard driving conditions require its replacement at 60,000 miles, otherwise the timing belt replacement is scheduled for 100,000 miles.
How do you put an ac belt on a 2000 Chevy Metro 1.0 3 cyl.?
There is a tensioner between the crankshaft and the A/C compressor that has a bolt where it is attached to the vehicle. Loosen this bolt and the tensioner will move, allowing the belt to be placed around pulleys. When the bolt is tightened, it will put tension on the belt automatically.
Where to buy 3 cylinder timing belt cover for a Geo Metro?
chevy
How do you change AC belt in Chevy Avalanche?
If the belt only drives the ac compressor, loosen the compressor mounting bolts to let pressure off of the belt. Remove the belt and put on the new one. Pull the compressor to the side and put enough pressure to tension the belt as you tighten the bolts.
How do you replace a serpentine belt in a 1991 Chevy truck?
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
I have a 1980 Chevy Camaro and I want to take the compressor off and run it without it. Does anyone know of something I can put in place of the compressor to run my belt on?
tell them you want a belt for your car with out compressor. from harmonic balancer to wat ever else is running on your belt..
How to replace 98 Buick Skylark ac compressor?
Remove the freon from the system. Disconnect the compressor belt, then remove the lines. Unbolt the compressor and remove it. Install the new compressor, connect the lines and belt. Pull a system vacuum, then fill with new freon.
