go to the parts store and get a rear view mirror mounting kit and follow the instructions to a T.
Restoring a classic car or refusing to give one up means finding the right parts. JC Whitney has millions of car parts, including a rear view mirror for a 1973 Oldsmobile Cutlass Supreme.
take inside door panel off or loose enough to get to the 3 nuts that hold the mirror on.
Yes, My 72 Olds Cutlass convertible came with the light option package which included a map light in the rear view mirror.
I have a 1969 Oldsmobile Cutlass supreme. My car has a 1968 front bumper, hood, and grill. Its mirror of your question but If a 68 can go on a 69 I wouldn't see why a 69 couldn't go on a 68.
Use a marker pen to mark the area where the mirror was. Remove the glue residue from the windshield and the snap pin using a razor. Take an activator an rub the place where you will put the button. Allow it to dry for two minutes. Add glue to the button and place it on the rubbed place. Install the mirror.
It is probably in the fuse enclosure on the far left inside portion of the dash. You will probably have to go through the owners manual to see which circuit it is on. The fuses are marked by amperage and I believe by number. Good luck.
If you still have the mirror and the metal plate its easy. All you have to do is go the store and buy a kit its about 4.00 and takes about 5 minutes.
Remove the door panel. Towards the front of the door there are two screws holding the mirror on. Inside the door are two connectors that connect the mirror wires to the door. I have a 98 and if it is the same process that's all you need to do.
how to install driver mirror
take the door off you will need smalls hands and a decent wrench there to bolts and the power wire OLDsCRAZY
It is made as an assembly.
how to install Ford Ranger Driver Side View Mirror