Remove the door panel. Towards the front of the door there are two screws holding the mirror on. Inside the door are two connectors that connect the mirror wires to the door. I have a 98 and if it is the same process that's all you need to do.
how to install driver mirror
You first buy then install
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.
go to the parts store and get a rear view mirror mounting kit and follow the instructions to a T.
Hey Brian==If it is electric, turn the button that operates the left mirror and it will control the right one. Some have just the right mirror electric. GoodluckJoe
on the inside of the door, opposite of the mirror there is a plastic cover, remove the cover and the bolts holding the mirror on will be exposed.
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
take the door panel off and then you can get to the 3- 10 millimeter nuts that hold the mirror on, take the nuts off and if the mirror is electric you have to unplug the mirror from the harness and then just pull the mirror off, to install just reverse the process.
How do I install passenger side mirror 2010 Ford Explorer
The aurora has no traditional speedometer cable. There are two sensors that send a signal to the speedometer. the first and easiest to change is located on the passenger side front transaxle, top side. Pray that it is that one because the other is located on the transmission. To remove the output sensor there is only 1 bolt and then you can lift the sensor from the well.Is easier if you use an inspection mirror.
remove inside pannel you will see 3 nuts behind mirror remove and mirror will come out install new