It is easy to replace the mirror. First lift the door handle on the inside and remove the screw behind the handle. Second remove the door pannel. There is pop in fastners holding the door on. If any fall out when you remove the door pannel just slide them back in there slots when you put it back on. Next remove the rubber grommets covering the access to the bolts holding the mirror on. Use a 10mm socket to remove the mirror. If you have power / heated mirror just unplug the old mirror and when you go to install the new one run the wires back the same way the old ones were. Installing the new one is doing what you did to take the old on off in reverse. Take your time and pay attention to how you took it apart and putting everything back together will be easy. One las tip. If you have power windows, when you remove the door pannel unhook the power window control so the door panel isn't hanging. There is a chance you can damage the wires and the switch pannel by letting it hang, you can also scratch the door pannel if you drag it on the ground opening and closing the door.
Get a Jayne's Manual @ the library & look it up.
HOW TO GET A PULLEY OFF A 1998 CHEVY BLAZER
2.8 & 4.3 V6. You can also install a small block Chevy V8.
I need diagram for 1998 chevy blazer fuse panel
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
YES they are the same.
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
Yes.
NO it will not. They are complete DIFFERENT designs. Will NOT interchange.
Yes, they both had the same transmission options.
== ==
The oil cap on a 1998 Chevy Blazer is located on the passenger side of the motor. It is just to the left of the manifold cover.