Should be located in a removable housing at the engine end the upper radiator hose Drain about 1 gallon of coolant from the radiator
Remove this housing
Make note how thermostat is installed
Clean both surfaces
Replace thermstat and gasket
Re-fill coolant slowly to prevent an air lock
Start engine and look for leaks
Run engine to normal operating temperature with heater on
Re-check coolant level
It is under the housing where the upper radiator hose attaches to the engine.
There wasn't a 2000 LeBaron. On a Lebaron, the thermostat is under the housing where the upper radiator hose attaches to the engine.
You remove the old thermostat and install a new one.
how du you replace a thermostat in Mazda pickup b2300 94
You remove them one at a time, and install the new one the same way.
The Chrysler LeBaron was discontinued in 1995.
They stopped making the Lebaron in 1995...
Yes, they are equal from 1987 up to 1995
No.
No.
If the thermostat is stuck open, the engine will never warm up to proper temperature.
Drain the radiator into a container. Follow the upper radiator hose to the engine. there you will find the thermostat housing. Remove the housing and the thermostat. Clean the surfaces and install the new thermostat and hose. top off the radiator.jd