0
How do you install a trailer brake control on an 2006 uplander?
Wiki User
∙ 12y ago
I've been trying to figure this out also. I think I've found a solution for the brake light signal. Roadmaster Inc makes a mounting bracket and wiring kit #751426. The kit is made for making an Uplander towable behind a motorhome, but should be ok to wire into a brake controller. The reason this switch is needed is because the factory switch on the brake pedal isn't an On/Off switch. It's a variable resistance switch going to the BCM (Body Control Module). The BCM outputs to the rear brake light through a white wire on connector 2 pin 30. The problem with this wire is that when no brake is applied there is still 2 volts present.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What does an error code of OC mean on a trailer brake control?
Trailer disconnected
When i tried to plug a trailer lights to my 2005 Chevy uplander it made my signal light and brake lights stop working what could be the problem?
Short circuit , maybe ????
How can you test the trailer emergency brake?
Charge the trailer air brake system and check that the trailer rolls freely then stop and pull out the trailer air supply control also called tractor protection valve control the trailer emergency valve or place it in with the tractor to check that the trailer emergency brakes are on.
What does mean TBC Fault?
Trailer Brake Control fault.
How do you install a brake controller in a 2003 2500HD Chevrolet?
By following the instructions that came in the box of the new trailer brake controller.
What is a wabco 9730091000 air brake valve?
It's a trailer control valve.
Changing brakes on a Chevy uplander?
Remove the wheel. Next, remove the springs and the retaining clips. The brake pads will come off. Reverse the process to install the new brakes.
What is the color of the air brake knob on a peterbilt?
Yellow for the tractor brake control valve, red for the trailer supply valve.
How to bleed brakes on 2008 uplander front and rear?
To bleed brakes on your 2008 Uplander front and rear, disconnect the brake line at the caliper.
How can i tell if my car js wired for electric trailer brakes?
You should have a trailer brake control module (either OEM or aftermarket installation) if it is.
07 f150 towing a 18 ft car hauler Do you need a trailer brake contoler or anything specialIt has the 7 pin adapter and has electric brakes on trailer?
You will need a trailer brake control installed in the truck. If you have the towing package on the truck (hitch receiver and seven blade plug) then the brake control is a simple plug in installation that takes no more than 20 minutes.
Which fuses control the trailer lights in a 2004 Ford Expediton?
There are no extra fuses for your trailer lights. If you have the towing package (and you do) the trailer lights run through your regular fuses (tail, brake, turn).
