Remove the panel by unscrewing the screws that are located around the panel, most of them are visible by removing the plastic caps that cover them. The door handle cover is snapped in by tabs, pry them of carefully with a screwdriver. Disconnect the electrics for the door lock and the window. Peel back the plastic dust cover to expose the three bolts that hold the regulator motor and also the three bolts that hold the track. Install the new regulator. You also need to unbolt the glass from the track and carefully slide the glass up and out.
You can but, on a 2010 Camry the window module should be covered in your warranty. Even if you bought the car from someone else the manufactures warranty should transfer to you. If for some reason your Camry is out of warranty you first need to determine if it is the module or the window regulator. Good luck
Remove the door panel. Use a coat hanger or ty rap to secure the window in the up position. Disconnect the wiring from the motor. Remove the bolts that secure the glass to the regulator. Remove the regulator. Install motor on new regulator. Installation is the reverse procedure. 6 to 8 bolts in entire process. Good Luck. CAH
How do you install a timing belt on a 1993 Toyota Camry that has a 2.2 liter engine
you can't do that
Call your local used auto parts wrecking yard.
how to install replace air intake hose toyota camry 1998
There should be a stop bolted onto the inside door frame. Look to see if it has broken or come loose.
The panel where the regulator is detachable. You will be able to remove it very easily. When you remove the panel you will see the way how the regulator can be replaced.
un plug the connector at the window regulator, check for 12V, if you have it when you press the switch up or down, its your regulator, if not it mat be the window switch or a problem further up a wiring diagram Justin
Buy a thermostat and install it.
start with dynamite....... start with dynamite.......
how do you install a water pump on a 1992 toyota camry