Want this question answered?
Yes Go to a Chrysler Dealer and ask the parts department to print you one It should be free especialy if they think you intend on buying something
The four door Chrysler LeBaron door panels are held in place with two retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
It usually clips between the inner pad's back and caliper.
Anti -rattle clips not installed or not installed properly
Ensure the anti rattle clips/springs are attached to the brake pad or it will rattle. Some cheap pads do not vome with these clips/springs.
Try you auto parts store for the little $3.00 plastic clips that break at the base of the wiper attachment for a simple solution. Otherwise fuse blown maybe. Mary
These clips are attached to the front brake pads to keep them from rattling inside the assembly. If you are doing a brake job, just notice how the clips are attached when you remove the old pads, then reattach them. If they are broken or missing, get a new set where you got the pads (the pads generally don't come with clips). don't quite understand question. whre are you trying to put these clips ?
new caliper mounting bolts they come with thread lock on them the clips are anti rattle clips that stops the pad from clicking when you stop
Squeaking usually caused by vibration Anti-rattle clips (if any) installed? A paste type compound is available to stop rattle
Remove the hoses and clips , replace the hoses and clips!
You don't have to bend any, they should fit tight as is.
usually the metal clips are anti-rattle clips to keep the brake pads from chattering in the caliper when braking, they also act as retainers for the pads