http://www.strutmasters.com/luxury-suspensions/air-ride-problems.htm
go here you should find all you need to know and the Conversion Kits
Don't think OP was referring to conversion kits, he meant the front coils that are std equipment on all TCs.
NAPA Auto Parts stores will sell you a new pair for about $60 - $65..
Lincoln Town Cars are built on the same platform as the Ford Crown Victoria (the Panther Platform). To convert your Lincoln from air springs to coil springs, simply replace the Lincoln air aprings with the coil springs for a Ford Crown Victoria. (Depending on the ride you want, you can choose to either install the standard coil springs from a civilian-equiped Crown Victoria or you can install the coil springs used on the Police Interceptor version of the Crown Vic.) In addition to the coil springs, you will also need to purchase the rubber insulators to install between the car's frame and the coil spring. Simply remove your Lincoln's air spring system and install the new rubber insulators and coil springs. Many websites have detailed instructions and most "shade tree" mechanics can do the job themselves. The cost of the parts should cost no more than $125.00.
Remove the vacuum hose from your 1995 Lincoln Town Car PCV valve. Remove the retaining screws from the valve. Reverse the process to install the new PCV valve.
A 1995 Lincoln Town Car came from the factory with ( 5W-30 )
Yes 26,s will fit on a 1995 Lincoln.
I have always run regular gas in my 1995 Lincoln town car. 110,000 miles, still going strong.
On a 1995 Lincoln Town Car : firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of vehicle
The Lincoln MK VIII series ( '93-'98 ) were rear wheel drive.
yes they will
I looked up the 1995 Lincoln Town Car on one of the Ford websites and the drawings show that the starter flange has ( 2 bolts )
there.
$2000
INSIDE THE TANK