Want this question answered?
how to install volvo 740 turn signal lens
Mexican spec.
Raising the ride height of the front suspension is best accomplished by installing adjusters to the torsion housing, or buying a torsion housing (front beam) with adjusters already installed. These adjusters and modified torsion housings (front beams) are available from numerous VW parts sources.
You can change the front turn signal, on your 2006 Pontiac Montana, by removing the retaining nuts. Remove the wiring harness. The turn signal will come free. Reverse the process to install the new turn signal.
install 3 inch raised spindles/this won't affect ride quality
The front turn signals on my 2002 Beetle Turbo S can be popped out by carefully inserting a flat screw driver on inside the lower edge and pressing down on the metal spring clip that holds the signal lamp assembly in. It will then pivit up and out. It's pretty simple, but be careful not to scratch your paint.
Raise the front of the car and look underneath the front facia (bumper). You'll see a plastic cover on the bottom of the car. Located at each side in front of the tires you'll find access doors. Remove the screws. Now you can reach up and behind your front turn signal lights to change the bulbs. You can also get to the mounting screws this way to remove the light housings
This vehicle has poor ground connections for the front turn signal circuits. You need to go the dealer and have them install a front turn signal repair kit. It consists of a small repair harness and a modified turn signal bulb socket, plus a modified bulb.
If you look at the front suspension of any beetle you can tell if it is a super or non-super beetle. If there is a McPherson front suspension then it is a super beetle. If there is a torsion bar front suspension then it is a non-super beetle.
The 2012 Volkswagen Beetle has 55.3 in. of front shoulder room.
The 2013 Volkswagen Beetle has 41.3 in. of front leg room.
The 2012 Volkswagen Beetle has 39.4 in. of front head room.