You don't. Saturn Ions don't use a hydraulic Power Steering system. They use an electric power steering system using a small electric motor to provide steering assistance. If you have any problems with the power steering, take it to a GM dealer. GM had many problems with it, so they extended the power steering warranty on all Saturn Ions, Chevy Cobalts, Chevy HHRs and Pontiac G5s to 10 years or 100,000 miles.
Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.
Remove the belt for am your power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
Drain the fluid from the power steering pump. Remove the power steering hose. Remove the wiring harness from the power steering pump. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
Begin by removing the power steering pump belt. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
Remove the 1998 Oldsmobile power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
Remove the belt from your 1969 Chevy power steering pump. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.
To replace the power steering pump on a 1999 Saturn SL1, first, disconnect the negative battery cable and remove the serpentine belt. Then, detach the pump's fluid lines and unbolt the pump from its mounting bracket. After removing the old pump, install the new one by reversing the process, ensuring all connections are tight, and refill the power steering fluid before testing the system. Finally, check for leaks and ensure the steering operates smoothly.
If you have a 2.0L Zetec-E (Zetec): Removal Remove the accessory drive belt. Disconnect the power steering line from the power steering pump. Allow the fluid to drain into a suitable container. Remove the power steering pump lower retaining bolts. Disconnect the power steering pressure (PSP) switch electrical connector. Depress the locking tang. Disconnect the power steering hose from the power steering pump. Allow the fluid to drain into a suitable container. Remove the power steering pump upper retaining bolts. Raise and support the vehicle. Remove the power steering pump. Remove the PSP switch. CAUTION: Make sure vice jaw protectors are used. Secure the power steering pump in a vice. Using the special tool, remove the power steering pump pulley. Installation Using the special tool, install the power steering pump pulley. NOTE: If installing a new power steering pump, the unions that are supplied fitted to the pump should be removed and retained for future use. Using the special tool, install a new O-ring seal onto the steering gear to power steering pump union. Push the new O-ring seal onto the special tool. Locate the special tool onto the union and install the O-ring seal. Install the PSP switch. Remove the power steering pump from the vice. Install the power steering pump. Install the lower retaining bolts. Connect the power steering line. Lower the vehicle. Install the power steering pump upper retaining bolts. Connect the power steering hose to the power steering pump. Connect the PSP switch electrical connector. Install the accessory drive belt. Fill the power steering system. If you have a 2.0 SPI engine: Removal Detach the accessory drive belt from the power steering pump pulley. Using a
You will need to remove the power steering pump belt in your 1997 Chevrolet Express. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
How to replace a power steering pump on a 97' GMC sierra 1500
Your Vue has electric steering therefore there is no pump. If you have no power strg you have an electrical problem........with the power steering unit or wiring to it. Troubles codes can be read for the steering to help in diagnostics
Remove the belt from your 1992 Chevy Lumina power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.