0
1. Loosen the idler pullery bracket adjustment and pivot bolts. 2. Position a suitable belt tension gauge. 3. Install a 1/2 in. breaker bar in the hole in the idler pulley bracket. Apply tension to the belt using the breaker bar. 4. Set the tension on a new belt to 170 lbs or a used belt to 140lbs. While maintaining the tension, tighten the adjustment bolt to 30ft. lbs 5. Remove the belt tension gauge and the breaker bar. Start the engine and let it idle for 5 minutes. 6. Shut the engine off, then reinstall the belt tension gauge and breaker bar. Apply tension with the breaker bar and slowly loosen the adjustment bolt to allow belt tension to increase to the used belt specification, 140 ft. lbs. Tighten the adjustment bolt to 30 ft. lbs. 7. Tighten the pivot bolt to 50ft. lbs.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you install an ac belt on your integra?
How_do_you_install_an_ac_belt_on_your_integra
How do you install the V-belt in a 1996 Rodeo?
You have to remove the ac belt first then the v belt. Once you get them off you need to replace the v belt and ensure it is tight enough. then the ac belt.
How do you replace a serpentine belt in a 1991 Chevy truck?
How to remove and install the serpentine belt on 1991 Chevy Blazer with AC?
Eliminate AC compressor 1994 Chevy pickup?
Remove it, and install a shorter belt.
Do know the size of the shorter belt on a 99 caravan with a 3.3 that bypass the ac?
There is an available bypass kit, but the belt is the same. You remove the ac compressor and install an idler pulley.
How do you install an AC belt in a 1990 Lincoln town car?
Go There is a nut behind the idler pulley. There is no spring like in most idler pulley's. You must loosen the nut first then use a 1/2 breaker bar or an belt tool to tighten the belt. Then re-tighten the nut.
Install freon on 1990 Oldsmobile 88 royale ac install freon in 1990 Oldsmobile 88 royale air conditioner?
Buy a kit at Wal-Mart or auto parts comes with instructions
How do you change the serpentine belt on an 88 blazer S10 with no AC?
Find the idler tensioner pulley and retract it. You then will be able to easily remove and replace the belt.
How long would the serpentine belt be on a 1998 3.3 liter dodge caravan bypassing the ac?
You have to use the same belt and install a dummy pulley kit in place of the ac compressor.
To replace the ac belt on 1990 dodge spirit?
Replacing the AC belt is probably one of the easiest things to do... Just simply losen the tensioner pulley and remove belt... Install new belt on all the pulleys then tighten the tensioner pulley. Its that easy.
Can you bypass the ac pulley when changing a serpentine belt in a 94 Oldsmobile Elite l if so how long should the belt be?
I have seen on an Olds forum that the belt for the 86 olds 88 w/o a/c will work. It should be 75.5 in instead of 103 (the 1986 88 belt is 76.1 in)
Can you bypass ac on Hyundai Sonata with another serpentine belt?
The AC compressor was locked on my Sonata 2004 - V6-2.7. The original serpentine belt broke. I bypassed it with a Duralast 6PK1700 (OLD NO. 670K6). The autotensioner has to be removed to install the belt.
