Want this question answered?
There is no adjustment on that year. You either have a worn out clutch disc or a bad clutch slave cylinder. Could be a bad clutch master cylinder too.
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
That year is NOT ajustable. It sounds like it is TIME for a NEW clutch. It may just be the clutch slave cylinder too. Check it first.
There is no adjustment, The clutch it self is either worn out, Bad clutch slave cylinder. Air are no fluid in the clutch mastercylinder. Fill clutch master cylinder up with fluid, be sure to remove the little rubber cub that is inside of the clutch master cylinder before you fill it up, then bleed the clutch of all air. Then see if the clutch works better.
Need to know how to assemble 95 Chevy clutch master cylinder?
You have to remove the transmission to get to the clutch slave cylinder on that truck. You can pull the engine if you want and get to it. YOUR CHOICE.
Un hook the clutch pedal from the rod and then twist the master cylinder counter clockwise to release it from the firewall then drive out the pin holding the hose to the master cylinder, then reverse this to install the new one.
you must remove the clutch slave cylinder and line. Then unbolt the starser and install the new one
Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.
You can't, there is no adjustment. Time to replace clutch, slave cylinder or clutch master cylinder. 1 of the 3.
Very Carefully.
1996