If you are using XILINX FPGA, try to insert a Microblaze processor to control your ADC.
FPGA is a programmable device you have to interface this with a display device and input device to get image. Then you can write a logic to process the image for the very particular device. This is little tough job so take support from DSP for more complicated formats.
Yes, FPGA is used in some ways in mobiles.
fpga and plc are two completely different things. FPGA( field programmable gate arrays) are building blocks of electronic sysytem where as plc are systems. Comparing these two is like comparing engine with car.
SRAM based FPGAs cant be used for space application But we can go for Radiation tollerant Anti fuse FPGA.
they are same expect error .in adc0809 1/2 lsb unadjusted error is present and in adc 0809 1lsb error is present.
It depends on the ADC and PIC
i really dont thing so!
Analog instrument are interface with digital instrument with the help of analog to digital converter(ADC).ADC converts analog signals to digital signals.
FPGA is a programmable device you have to interface this with a display device and input device to get image. Then you can write a logic to process the image for the very particular device. This is little tough job so take support from DSP for more complicated formats.
Yes, FPGA is used in some ways in mobiles.
FPGA is sutiable for complicated arch than CPLD. CPLD is very tiny when compared to the logic of FPGA so CPLD is faster.
Types Of ADC Are As follows: 1.Counter type ADC 2.Successive approximation type ADC 3.Flash Type ADC 4.Wilkinson type ADC
micro controller is software and fpga is hardware
fpga has fine grain architecture and it can be programmed easily at field
fpga has fine grain architecture and it can be programmed easily at field
The voltage at which the adc converts the signal.... it can also be called a limit of an ADC.
FPGA and FPAA are both very different in nature and APLLICATIONS also.