If in doubt, replace it.
Answerwith the engine running take the valve out of the cover and put your thumb over the bottom of it, if you feel suction its working. you can also remove it and shake it, listen for the rattle. if no suction you may have sludege buid up in the line carrying the valve, or put a coat hanger thru it
it should rattle when shaken, then you should be able to blow air through one end real easy, but the other way should be completely sealed, no air whats so ever, if it does leak its bad, replace it. harry
yo this thing is located right off the valve cover always...the pcv valve.
the pcv valve on all vehicles is right next to the intake manifold
The pcv valve should be in the right end of the front valve cover in a rubber grommet
The PCV valve located is on top of the valve cover. It is right beside of the oil filler cap.
PCV valve should be on bottom right side of motor. to the right of the last spark plug. Pull it out with car off. It comes out with a hose on it. Insert new PCV valve into hose. Insert PCV into open hole.
The PCV valve is located on the right side of the valve cover. After removing the hose, there is a retainer clip then the valve can be removed with pliers.
On a 1996 Chevy Camaro, the PCV valve is located on the right side of the valve cover. There is a hose that runs from the PCV valve and connects to the back of the intake manifold.
on the right side of the valve cover
It is located in the right valve cover.
The f250 5.8 PCV valve is located on the right valve cover. It is at the back, behind the intake manifold.
the pcv valve is on the back right of the valve cover if not get one
The PCV valve on the 98 is located in the top of the right (driver's side) valve cover near the back.