Want this question answered?
electric window motor bad or switch is bad check the motor and see if its getting power if so motor is burnt up if not switch is bad
Use a test light to see if the motor is getting power. If it is then motor is bad. If it is not getting power "jump" the wires on the switch to see if window will operate, is so switch is bad
bad window motor if electric or a bad switch.
9 outta 10 times it will be a bad power window motor. I rarely see the window switch go bad.
remove switch from where it is mounted using a wire , bridge the connections.if switch is bad, it will work the motor while bridged
It's either a bad Switch, bad/loose wire, or bad window motor
Bad switch or motor on other window Check to see if you are getting power to it - if so bad motor - if not maybe bad switch or open in wiring circuit
regulator in the motor is bad or there is a bad contact on the switch junk yard window motors are cheap
Bad relay/window motor/switch/wiring...........
Remove door panel to check wiring to switch and motor See if motor is getting power through the switch - if so motor is bad If no power to motor check operation of switch - jump wires to test if window works bad switch
If there is noise coming from the door when you push the switch up or down, then the window regulator is the problem. If there is no noise or movement of any kind it would be the motor or the wiring leading up to the motor such as a bad switch or broken connection.
you can by pass the switch, get wiring diagram and figuare out wich wires are for window motor you need rolled up, then remove switch and put power to wire that will make motor roll window up