Get bar that fits in slots on end of cams. The bar fits the cams only when at correct timing. At least this is how on 98
Look for detent marking on camshaft sprockets and align them with timing marks on cylinder head, should be visable markings and ensure that engine is at TDC on compression stroke, and timing marks should all line up
The cam sprockets have marks, triangles on them near one of the teeth. These are lined up with notches in the rear cover for the timing belt. Some crank sprockets have two marks, one to align with the mark on the block, the other to use to match to marks on an OEM timing belt. After market belts don't usually have this mark.
THERE ARE SMALL HOLES IN THE TIMING GEARS THAT LINE UP WITH MARKS ON THE FRONT OF THE HEAD. When the crank pulley is at TDC on the compression stroke, 'E' & 'I' on the camshaft sprockets should be at 12 o'clock.
how do you line up the timing marks 2.3 jtd
check the timing position the dash marks of both camshafts should be on one line while the mark of the crankshaft in the right position >
line up the marks on the belt to the marks on the timing wheels
The timing chain has plated links that line up with marks on the sprockets.The timing chain has plated links that line up with marks on the sprockets.
Timing marks are on the top of the timing gear rear cover. With the cover off, these marks will line up with the timing marks on the intake and exhaust gears when the crankshaft gear timing mark faces down to its mark at the bottom. Good luck!
The timing marks are on the crank pulley and oil pan. You have to line them up and also line your cams up.
timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up timing are marks are on the cam and cranshaft pulleys all u need to do is line the marks up
The timing marks on a 1969 Ford 360 should line up between the timing chain and the cam sprocket. This sets the initial timing which can later be adjusted using a timing light.
On your top and bottom pulleys ,you have timing marks,they should line up when time is correct.