The starter is on the passenger side, in the rear of the engine. You have to take part of the exhaust off to be able to get to the starter.
by taking it to a reputable mechanics shop.....
2
I had to remove the bell housing, otherwise the starter lacked about a 1/4 of an inch from being able to get it off.
how do you replace hydraulic line on a 1997 s-10
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Your vehicle has a starter solenoid which is piggy back on the starter.
S10 dont have struts the have coil springs and shocks
you have to remove the starter to replace the relay and the relay cost almost as much as the whole starter so you are better off just replacing the whole starter.
it is on the hose that comes from the air filter box
Follow the brake lines from the master cylinder, they will lead you right to the ABS module.
What is the cargo load capacity of a stock 1997 S10 pickup? Thanks
for that type of cheap car the whole steering column it will run you about 10 to 15 pesos at the most