how do i replace a trunk lock with another lock that has a key
On my 1992 190E I can lock the trunk with any of the keyed locks. If you lock the doors, the trunk locks and if you lock the trunk, the doors lock. In other words all the keyed locks are electrically interconnected. In reality the locks are not electrically interconnected. There is a pump in the right side wheel well of the trunk, it uses vacuum to lock all the locks and pressure to unlock them. Although the pump is powered electrically, the locks are not.
* Remove the trunk lid latch * Detach the lock release box from the latch assembly * To detach the lock cylinder from the trunk lid pry off the retainer
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
It is not possible to replace the trunk lock on a 1993 Caprice Classic while the trunk is closed. A person will have to remove the back seat, crawl into the trunk and open the lock manually before it can be replaced.
call a lock smith
Sorry, but your question makes no sense at all. What does a trunk lock have to do with your car starting or not.
Show removel of trunk lock 1993 chrysler lebaron
Does it not have a key lock on the trunk lid.
There's a whole toolkit including the tire lock on the inside of the lid of the trunk. When you open the trunk lid, look up not down. :)
Won't the valet key open the trunk
The trunk lock on a 1989 Chevrolet Caprice is replaced by removing the retaining clip and unscrewing the bolts holding it in place. The lock can then be pulled through the opening and a new lock put in place.