You can possibly use a heat gun or propane torch.
it is useful to know which materials are electrical conductors so if you wanted to make an electric current you could. For example is you where making a circuit you would need to know which materials you could use that would conduct electricity.or if there is something stuck in a power point you know what material to use to get it out without getting electrocuted
The door bell contacts are stuck together or corroded or the wires to it are shorted together at some point up to the power supply and bell.
Bring the temp up and they will separate. Warm water.
A stuck lifter, a stuck rocker, a stuck valve, a messed-up cam drive timing and a valve impacting the piston head....
No
That's impossible. With out dismantling the engine. Yoi have to take the head off , sump off to get to the big ends to loosen the connecting rod bolts. Tonpock the piston out up through the head.
crash your car and hope it comes of =]
in ford f150 the u-jounts on the steering shaft get stuck. Use WD40 to help loosen them. Toyota camry's too!
Without seeing your situation. If you are unable to loosen a bolt then use a longer wrench to put more torque on the bolt head. If the bolt is loose but stuck in the hole use a drift punch and a hammer to tap it out.
The steering pump is attached with 2 bolts. If you take the top bolt out and loosen the bottom bolt until it's almost completely out, you can move the pump/pulley enough to snake that bottom left water pump bolt out.
It is possible for things like food or pills to get stuck at the top of the epiglottis. The best way to loosen an object that's stuck is to slowly drink water.
lift the car and make sure your jack is secure. after you loosen the bolts you have to turn around and kick the tire as hard as you can if it's stuck. Don't be afraid to kick it extremely hard. It will not break. It will eventually pop loose.
I'm not sure if you have to remove the fan shroud, look at it, to see.Put a square stemmed screwdriver between the bolts and loosen the other one,relocate the screwdriver until all bolts are loosened then remove the bolts.Sometimes the fan is still stuck on the water pump and must be tapped off,careful,don't want to damage your radiator. L.Keedy
A breaker Bar. They are available at your local automotive store. My daughter bought me one for a gift at Harbor Freight tools for about ten bucks. It is the most used tool I own. It has made removing stuck nuts and bolts a real breeze. I cannot believe I struggled with frozen mower blade bolts for so many years before the breaker bar. Caution, use gloves and a piece of wood to wedge against the blade to keep it stationary while you turn the nut. Also, remove the plug wire from the spark plug, of course.
It is a brand name of penetrating oil used to free stuck bolts.
Un bolt it from the floor and get a new seat track from your local salvage yard. Lucky for you its stuck forward so the bolts will be a lot easier to get out.
Disconnect the battery. Loosen the wires to the starter and solenoid. Remove both bolts connecting the starter to the transmission bell housing. If the starter is stuck, tap it with a hammer until it's loose. If it still won't come out, look any obstructions.