0
The only reason there is problem in loosening the fuel lines is the wrong wrench is being used, which can slip on the fittings. A flare nut wrench should be used and these are then easy to properly loosen and tighten.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you replace the fuel filter on a Chevy Blazer?
Depending on the year, the blazers fuel filter is most likely on the frame. While covering the connection with a rag, loosen the fuel lines from the filter. Remove the filter and replace, then reconnect the lines.
How do you remove a fuel tank from a 1989 S10 Blazer 4WD with plastic shield?
there are straps that bolt to the frame loosen them and disconnec the fill tube, pressure, return, and vent lines and lower it carefully
Where is the fuel pump in a 2000 Chevy blazer?
The fuel pump is inside the tank
How to Thaw out fuel lines in 1998 Blazer?
You will have to put it somewhere warm.
What size fuel tank is a 2000 Chevy Blazer?
18gallon
Where is the fuel pump located on a 2000 Chevy blazer 4-wd?
in the fuel tank
How do you change fuel filter on a 2000 Chevy blazer?
You will need to drain the fuel from your 2000 Chevrolet Blazer fuel tank. Remove the fuel line from the fuel tank. Remove the fuel filter retaining plate. Remove the fuel filter. Reverse the process to install the new fuel filter.
How many fuel lines on 1994 s10 blazer?
Two fuel lines, one supply and one return. The third line is a vent line.
Does a 2000 blazer have a fuel pump reset?
sorry. No Reset on those.
What are the signs of a failing fuel pump on a 2000 Chevy blazer s10?
Inadequate fuel pressure. If that 2000 S10 Blazer has a 4.3 engine, it needs 61 to 66 psi (engine off with fuel pump running) to run properly.
Is there a fuel pump fuse or a fuel pump relay on a 2000 Blazer with a 4.3 engine?
There is a fuse and a relay.
Where is inertia switch on 1998 Chevy S 10 Blazer?
where is the fuel pump inertia switch located on a 2000 blazer
