Pull the top interior panel. Just pull it out. Take out the two screws on the lower panel. You will not be able to pull the panel completly off because of four screws you can not get to unless the gate is opened. Pull the panel back enough so that you can see the accuator at the bottom. Unplug both electrical connections. You will see a white plastic tab that Push that tab in towards the fron of the vehicle. You will feel a click. You can then open the door from the outside. Had the same problem. Ended up being the accuator. Remove three screws with a star bbit and replace. 30 minute job. $155. 00 for the assembly. $385.00- $500,00 at the stealership.
Remove the long access panel from the inside of the tailgate.Unhook the two metal rods from the handle on the inside of the tailgate.Remove the two bolts from the door handle located on the inside of the tailgate.
First you will need to gain access to the parts holding the door handle in place. To do so, you'll need to remove the inside door panel, with the window up. From there, you'll be able to access the door handle.
You must remove the door panel to gain access to the inside of the handle. Chect the rod and make sure the clip hasn't fallen off or broke. The more common problem with those handles are the eye where the rod attatches gets busted by someone who lets the handle snap back into the rest position. To replace the handle, you must remove the inside door panel to gain access to to the mounting bolts that hold the handle on.
you need to remove the inside door panel to get access to the inside, remove the clips holding the door handle assembly and the whole thing comes off
The fuel filter on a 2004 Dodge Durango is inside the fuel tank. It does not have an external filter.
The only way is to remove the inside door panel (not an easy job with the door closed). Once the panel is removed, you'll have access to the latch mechanism. You will be having to remove this panel to put a new door handle on anyway.
Inside the transmission.
You have to remove the inside door panel to get access to the door handle nuts.
you have to remove the door panel to access the inner door and remove the entire door handle assembly ( from the inside). Once you've got the handle out, remove the lock cylinder, to access the broken key.
How to replace the inside Spectra Heater Core on a 2000 dodge durango??
You should bte able to access from inside after removing door panel
A telescopic handle is a handle that extends from inside it's outer circumference and then contracts inside again.