0
wellan easy way for it is to keep in an open area and not by you lap or on your lap. the best way to keep it to overheat is to keep it away from blankets or anything that can condence heat. if it does overheat then it will stop charging your laptop and it will force itself to cool down before contuis use once more (this is for up to date chargers and Transformers only not all laptop will stop itself to cool down) older versions of tranformers or chargers will keep going and overheating anfter countinues use and therefore start melting and frying the wires inside of it. if you have any more questins about it just message me! (im only 13 so i dont everything about technology but i still know alot about it, even more than my technology teacher at school!)
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What are the causes of overheating of distribution transformer?
poor cooling mechanisms, and overloading.
What usually happens at consumer end when the current carrying capacity of transformer is exceeded?
What should happen is that the circuit-breaker should trip to cut off the current before the transformer becomes damaged by overheating.
Does led lighting require a transformer per light or one per circuit?
One transformer should feed several led's in parallel, but you have to work out how much current each one will take, total it up, and then get a transformer with the correct output voltage and that can supply the total current. Don't exceed the transformer max current or it may fail through overheating
What type of transformer will convert 120V-60HZ US into U.K.voltage?
The standard residential nominal voltage in the UK is 230 V (-6%/+10%). So, for the purpose of selecting a transformer, a 1:2 ratio, 120/240 V, transformer will be an appropriate choice.The capacity (volt ampere rating) of the transformer must match or exceed the power rating of the proposed load. You should be aware, though, that transformers will not change the frequency of the supply, only its voltage.Another thing to be considered is the transformer's country of manufacture and where you intend to use it. For example, if the transformer is manufactured in the US, then it will be designed to operate at a frequency of 60 Hz.On the other hand, if it is manufactured in Europe, then it will be designed to operate at 50 Hz.A transformer designed to operate at 60 Hz will overheatif it is operated at 50 Hz, whereas a transformer designed to operate at 50 Hz will operate without overheating if operated at 60 Hz.This means that you will be able to operate a European transformer in the US without any difficulty, but operating a US transformer in Europe will result in overheating -unless it is operated BELOW its rated primary/secondary voltage.So if you intend operating a US made transformer in Europe, then you should obtain a 1:2 ratio transformer, but one rated at, say, 240/480 V. This will then operate without overheating at 120/240 V.
What is the result when 3 kva power requirement is being supplied by 250 kva transformer?
The result is that the transformer runs cool and contented. The '250 KVA' rating on the transformer is its maximum ability to transfer power from its input to its output without overheating, NOT an amount of power always running through it. If the 3 KVA load happens to be the only thing connected to the transformer at the time, then only 3 KVA flows into the transformer from the primary line, and only 3 KVA leaves the transformer secondary.
Is there a basic difference between a three phase power transformer and a three phase distribution transformer?
The basic difference is the secondary voltages. On a distribution transformer the secondary voltage is very high. This is to overcome line loss for transmission of electricity over long distances. A three phase power transformer is used at the consumers three phase services end to manipulate voltages that consumers need to operate their equipment. The transformer that feeds your house is considered to be a single phase power transformer.
Why are transformer more efficient that rotating electric machines?
Because the electrical parts of a transformer do not move / rotate.
What is Full load current in transformer?
The no-load current of a transformer is the current which is drawn from the source at rated voltage and frequency even when no actual load current is being supplied.The no-load current is what must be drawn to overcome the inherent and unavoidable losses of the transformer's components. Those losses comprise the primary circuit's resistance (known either as the "copper losses" or as the "resistance losses") and the transformer's magnetic reluctance (known either as the "iron losses" or as the "magnetic losses").Reluctance is the techical description given to the energy necessary to excite the magnetic circuit and overcome its hysteresis, the effects of eddy currents, etc.For more information see the Related link shown below.
How do you reduce Transformer 6VA to 3VA?
In 2 words, you cannot! It is like asking how can I make a 60W light bulb into a 30W light bulb. If you are wanting to know this because a specification dictates that you need a 3VA transformer then anything larger is OK. However, you must pay attention to the voltages on the transformer. Firstly, assuming that this transformer is to operate on the mains supply, it should have the correct primary voltage for the mains supply in your area. In most, though not all of Europe, it is standardised at 230V 50Hz. The secondary (usually the output) should have the desired voltage output. This, for example, might be 6V A.C. If it is the only output then, if it is a 6VA transformer, it will be able to supply 1A maximum current. If it is a 3VA transformer, supplying 6V, it will be able to supply a current of 0.5A maximum. The term VA is for Volt-Amps. It refers to the power that would be developed in a resistive load. Hence the secondary voltage (V) multiplied by the maximum current rating (A) gives VA. Thus, if you have a transformer rated at 12VA and the secondary voltage is 5V then the maximum current the transformer can supply is VA/V=12/5=2.40AAnother AnswerThe volt ampere rating of a transformer simply indicates the maximum load it can supply without overheating. The same transformer can supply ANY load below that value. So there's absolutely no problem operating a 6 V.A transformer at 3 V.A.
What is a half transformer and a half transformer?
a hole transformer
How do you avoid overheating of the electrical wiring of the equipment?
Overheating of electrical wiring is overcome by installing the correct size conductors to carry the load amperage of the equipment. Use a larger size wire to the load. The main purpose of the breaker is to protect the wire that is connected to it. If the wire becomes overloaded due to a high current flow the breaker will trip.
Why induction transformer called rotating transformer?
Transformer has windings
