use a light coating OS spray paint so it will not clot up the open cell foam open cell is used because of acoustic transparency at the high frequencies maybe Krylon plastic paint will work but use light coats if this works i have 4 pairs of speakers to be painted
On ebay.com
its impossible
YOU WILL HAVE TO REMOVE THE REAR SEATS. THE SPEAKER GRILLS AND THE PANEL IN THE WINDOW IS ONE PIECE.
NO!:(
There is special High Heat Tremclad for that purpose.
To remove the front speakers from a Chevy Celebrity: 1. Take out the screws from the speaker grills, take the grills out. 2. The speaker is held in with screws, remove them. Lift the speakers out of the dash and unplug the wire harness.
Yes, you can paint foam. Although I wouldn't paint the handle, it could rub off on your hands and get... icky.
You have to remove the entire dash panel that the speaker grills are located on. Just pry the entire cover off from either the drivers side or passenger side. Shouldn't take too much work. I have the same car and replaced my speakers also. The speaker grills do not come off of the dash cover.
Speaker grills can be purchased from high street audio equipment retailers, such as Maplin. These items are also available from specialist online retailers such as SpeakerGrills.
There is 3 phillip type screw around speakers inside trunk...
Foam is really hard to dye. You can either paint the dye on or soak it in a bath of dye. Also a good dye that you can try is called dylon dye. You can find a video about dyeing foam here http://www.blogtv.com/Shows/736892/buZEY2NGaeZDbe_vYX&pos=ancr
I recently had a ceiling sprayed and the foam got on everything. Since we are building, I needed to get the foam off of the studs. I used a paint scraper and it worked perfectly. You can pick up a scraper at any store that sells paint. Hope this helps.