Its possible if you have a tig welder, and a good knowledge of welding thick aluminum but itts easier to buy a used one and put the internals that you have into the new gearhousing,
Check to see if your floorboard is rusted through. If it is patch it.
If it's cracked, it might be made of fiberglass, or plastic. Fiberglass patch or two part epoxy.
man cracked his head open when he was bare young!
If it's slight corrosion, run a tap through it, If its serious enough to be a structural problem in a critical area, may have to replace the part if practical or weld in a patch panel whichever is more cost effective.
Usually not. A few kits are sold, but most experts seem to agree that replacing the oil pan is the only cure.
He lived!
Fiber Optic Patch Cord is used to interconnect Transmission equipment to the Fiber optic patch panel. we got 2 kind of fiber optic patch core according to the mode: single mode patch core (SM) and multi-mode patch core(MM). and several kind according to the connector: sc, fc, st, lc patch core etc.
You can buy a patch kit at most of your local auto parts stores.*edit* I misread that and thought it said washer fluid, the patch kit I'm thinking of may not work in your case *edit*
a patch cable is aslo called a straight-through cable
Rust spots caused by exposed rebar can cause spalling to the gunite structure. This is usually caused by cracked marcite or diamond brite surface that is allowing water and air to reach the redar and/or expansion wire. In order to repair this type of damage we always recommend to cut through the pool surface and expose the rusted steel. Cutting away of all rust and then re-sealing the good portions must be done to keep this frome re-occuring. After the rust has been removed the repair can be re-plastered. One should be very careful when repairing any pool. There are many products out there that claim they will seal off any pool surface. these products only patch the surface, they do not repair the damaged steel. Without proper removal of the damage rusted steel major structural damage can occure. Patching over rusted steel in like placing a band-aid over a cut that needs stiches...
No there are no 1.0 version server you need to download 1.6 patch and then 1.7
You go through the snowy patch.