0
cegab
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
When was Young Mr. Bobbin created?
Young Mr. Bobbin was created on 1951-08-29.
How do thread a bobbin on a singer golden touch and sew model 620?
The bobbin is wound in the bobbin case. You open up the slide plate and push the little lever with the bull's eye on it all the way to the left. Then you thread the needle with the thread you want on the bobbin, then pull a few inches and wrap the needle thread around the knurled knob that holds the foot onto the shaft (to keep it from slipping.) Then you push down on the foot pedal and the bobbin fills from the needle thread. Don't overfill the bobbin or it won't wind out properly.
How do you load a front loading bobbin?
I'm assuming you're talking about winding a bobbin on a sewing machine? If so, there is a post similar to the one for thread (near it) that you put the empty bobbin on. Then you put your spool of thread where it goes on the machine. You wind your thread from the spool of thread to the bobbin (there's usually a little chart on your machine, but if not, the thread goes through a hook or two and then you wind it about 4 times around the bobbin (clockwise). In newer machines you then push the bobbin toward a holder type thing that is near it. This disengages the needle from going up and down and lets the machine wind the thread as you push the pedal. On older machines, you have to turn the handle of the machine toward you and it disengages the needle, allowing the bobbin to be filled when you press the pedal. Hope this helps! You could probably google your sewing machine name and how to thread a bobbin and maybe get a diagram.
How do I get the bobbin out of the bobbin case?
Depends on the machine brand. To determine which way to load the bobbin into the bobbin case you need to determine which way the slot is facing that the tread slides into prior to it slipping under the tension clip. Hold the bobbin case with the opening away from you with the slot facing up. If the slot on the bobbin case is facing to the left put the bobbin into the case with the thread spinning the bobbin counter clockwise. If the slot on the bobbin case faces to the right put the bobbin into the case with the thread spinning the bobbin clockwise.
What is the automatic bobbin winder?
Automatic declutch bobbin winder – which means the machine automatically stops the needle from going up and down when you are winding thread onto the bobbin. ... Needle up/down button – this button allows you to start and stop with the needle in the down position if it is highlighted.
What is the purpose of a bobbin in a sewing machine?
A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.
What part does wind play in erosion?
Wind picks up sediment which causes erosion when it hits the rock.
Why is the bobbin thread of a Euro-pro model 420 tangling all up?
I don't have the answer, but my 420 does this all the time. I know it is a bobbin problem, but cannot figure it out. I reinsert the whole bobbin contraction over and over. I'm thinking of this useless machine myself!
Why is the underside of sewing bunched up?
shuttle bobbin tension too tight
You got a sewing machine a while ago and just opened it so that you could hem up a pair of jeans you threaded it and your stitches are pulling right out What are you doing wrong?
Have you made sure the bobbin hasn't run out? If the stitches are pulling out then the most commen problem is that there isn't a bobbin in the machine or the bobbin has run out of thread or the bobbin isn't threaded properly. Good luck!
What part of speech is winds?
It depends on the context. Wind can be a noun, when it refers to the atmospheric disturbance: for example, "We could hear the wind in the trees." However, when the pronunciation is different, wind can be a verb: for example, "In the past, you had to wind up a clock every couple of days."
Is a flute a percusstion or wind?
It is a wind instrument, you blow into a flute therefore it is wind. (I play flute so I didn't just go on theory or make it up either)
